Friday, January 20, 2012

COAST PROCESSES PART 2

Coasts are shaped by the sea and the action of waves. The processes that take place are erosion, transportation and deposition.

The action of waves
The power of waves is one of the most significant forces of coastal change. Waves are created by wind blowing over the surface of the sea. As the wind blows over the sea, friction is created - producing a swell in the water. The energy of the wind causes water particles to rotate inside the swell and this moves the wave forward.

The size and energy of a wave is influenced by:
  • how long the wind has been blowing
  • the strength of the wind
  • how far the wave has travelled (the fetch)


Waves can be destructive or constructive.
When a wave breaks, water is washed up the beach - this is called the swash. Then the water runs back down the beach - this is called the backwash. With a constructive wave, the swash is stronger than the backwash. With a destructive wave, the backwash is stronger than the swash.

Constructive and destructive waves

Destructive waves

The effects of a high wave

  • Destructive waves are created in storm conditions.
  • They are created from big, strong waves when the wind is powerful and has been blowing for a long time.
  • They occur when wave energy is high and the wave has travelled over a long fetch.
  • They tend to erode the coast.
  • They have a stronger backwash than swash.
  • They have a short wave length and are high and steep.
Constructive waves

The effects of a low wave

  • They are created in calm weather and are less powerful than destructive waves.
  • They break on the shore and deposit material, building up beaches.
  • They have a swash that is stronger than the backwash.
  • They have a long wavelength, and are low in height.
Coastal erosion
The sea shapes the coastal landscape. Coastal erosion is the wearing away and breaking up of rock along the coast. Destructive waves erode the coastline in a number of ways:
  • Hydraulic action. Air may become trapped in joints and cracks on a cliff face. When a wave breaks, the trapped air is compressed which weakens the cliff and causes erosion.
  • Abrasion. Bits of rock and sand in waves grind down cliff surfaces like sandpaper.
  • Attrition. Waves smash rocks and pebbles on the shore into each other, and they break and become smoother.
  • Solution. Acids contained in sea water will dissolve some types of rock such as chalk or limestone.

Transport
There are various sources of the material in the sea. The material has been:
  • eroded from cliffs
  • transported by longshore drift along the coastline
  • brought inland from offshore by constructive waves
  • carried to the coastline by rivers
Waves can approach the coast at an angle because of the direction of the prevailing wind. The swash of the waves carries material up the beach at an angle. The backwash then flows back to the sea in a straight line at 90°. This movement of material is called transportation.

Continual swash and backwash transports material sideways along the coast. This movement of material is called longshore drift and occurs in a zigzag.


Coastal transport
There are four ways that waves and tidal currents transport sediment. These can then contribute to the movement of sediment by longshore drift.

ProcessDescription
SolutionMinerals are dissolved in sea water and carried in solution. The load is not visible. Load can come from cliffs made from chalk or limestone, and calcium carbonate is carried along in solution.
SuspensionSmall particles are carried in water, eg silts and clays, which can make the water look cloudy. Currents pick up large amounts of sediment in suspension during a storm, when strong winds generate high energy waves.
SaltationLoad is bounced along the sea bed, eg small pieces of shingle or large sand grains. Currents cannot keep the larger and heavier sediment afloat for long periods.
TractionPebbles and larger sediment are rolled along the sea bed.

Deposition
When the sea loses energy, it drops the sand, rock particles and pebbles it has been carrying. This is called deposition. Deposition happens when the swash is stronger than the backwash and is associated with constructive waves.

Deposition is likely to occur when:
  • waves enter an area of shallow water.
  • waves enter a sheltered area, eg a cove or bay.
  • there is little wind.
  • there is a good supply of material.


Do you like this post? Please link back to this article by copying one of the codes below.

URL: HTML link code: BB (forum) link code: